Low Pressure High Purity Non-Corrosive Single Stage Zinc Line Pressure Regulator A1 Model 3701NVHP Del Range. 2-25" Water, Inlet Press 250 psig NO VALVE

These regulators were designed to meet the needs of applications requiring reliable low-pressure control while maintaining gas purity. They are available in single and two stage versions to meet most non-corrosive gas applications. The low pressure stage has a large sensitive aluminum-faced natural rubber diaphragm to provide delivery pressures as low as 2" of water.

NO OUTLET VALVE

Body & Bonnet: Zinc
Seat: Nitrile
Diaphragm: Aluminum-faced natural rubber
Internal parts: Steel, brass, and zinc

The Series 3700HP regulators are available in three delivery pressure ranges; 2-25" of water, and 0.8-2.7 psig and 2.7-5 psig. As a line regulator they have a maximum inlet pressure rating of 250 psig. Inlet and outlet connections are 1/4" NPT female. The Series 3700HP has an aluminum faced natural rubber diaphragm to provide a diffusion resistant metal barrier for high purity gas applications.

TYPICAL LEAD-TIME 5-10 DAYS

Add the CGA connection of your choice to the Order Instructions/Comments Section Box at Check out time. CGA Connections will be installed on your equipment at NO CHARGE FOR PARTS OR LABOR (EXCEPT FOR CGA 240) CGA Connections are also sold separately and maybe Purchased by going under the CGA Connection Category. All outlet fittings and Connections are also sold separately and maybe purchased by going under our Compression or Pipe Fittings Categories.