A1 Brass Protocol Single Station Manifold 24" Teflon-Lined Pigtails With Check Valve Model 917B-2-CV

The 917 protocol station is designed to provide a convenient way to mount virtually any pressure regulator that has a CGA connection or 1/4" NPT female inlet. The wall mounting of a regulator makes changing cylinders safer and hassle-free, while protecting the regulator from damage during the changing process because the operator handles only the flexible pigtail.

The 917 series is available in brass or 316 stainless steel in both single cylinder and double cylinder configurations. Pressure regulators are connected to the system with regular CGA cylinder connections rather than be rigidly mounted;

this mounting system provides the virtual universality of the 917 and makes changing a regulator easy should it need to be replaced for any reason. With the (optional) 917-B and 917-BEX series pressure switches and the (optional) 912-AVA alarm this will alert users that the cylinder in use is approaching empty. When check valves are selected they are integral with the CGA connection to the cylinder. All models are rated for 3000 psig operating pressure.

The 917H protocol station is designed for use with helium and hydrogen and mixtures containing them. This model maintains the economy of the brass unit, but replaces the Teflon-lined pigtail with an all stainless steel pigtail to eliminate the diffusion of these small molecule gases through the Teflon lining.

Note: Protocol Station Manifolds have NO CGA Connections and are NOT included in the part number. Add the CGA connection of your choice to the Order Instructions/Comments Section Box at Check out time. CGA Connections will be installed on your equipment at NO CHARGE FOR PARTS OR LABOR (EXCEPT FOR CGA'S 170, 180, 240, 296) CGA Connections are also sold separately and maybe Purchased by going under the CGA Connection Category.

Note: Regulator and Pressure switch assemblies shown in picture are not included in price. They are options sold separately.